 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
ENGINE COVER REPLACEMENT - CONTINUED
0147 00
REMOVAL - CONTINUED
NOTE
Two capscrews (3) are longer than other
capscrews used to secure engine covers.
Note location of capscrews for use during
installation.
2.
Remove two capscrews (3), two lockwashers (4) and
3
3
two flatwashers (5) securing left-hand side of front
engine cover (1). Discard lockwashers.
4
6
4
3.
Remove remaining twelve capscrews (6), twelve lock-
5
4
5
washers (4) and twelve flatwashers (5), securing front
engine cover (1) and rear engine cover (2) to each
5
other, to vehicle frame and to radiator cover (7). Dis-
1
card lockwashers.
4.
If necessary, remove fourteen retainer nuts (8) from
vehicle frame and rear engine cover (2).
2
INSTALLATION
6
8
1.
If removed, install fourteen retainer nuts (8) to vehicle
7
4
frame and rear engine cover (2).
2.
Position front engine cover (1) and rear engine cover
5
(2) on vehicle frame.
409-565
NOTE
Capscrews (3) are longer than other capscrews used to secure engine covers. Install capscrews as noted dur-
ing removal.
Apply loctite to capscrews as installed.
3.
Install two capscrews (3), two new lockwashers (4) and two flatwashers (5) on left-hand side of front engine cover (1).
4.
Install remaining twelve capscrews (6), twelve new lockwashers (4) and twelve flatwashers (5) to secure front engine
cover (1) and rear engine cover (2) to each other, to vehicle frame and to radiator cover (7).
5.
Install air cleaner assembly (WP 0024 00).
6.
Install air cleaner restriction indicator tube (WP 0203 00).
7.
Install air cleaner (WP 0025 00).
8.
Install load backrest in storage position, if necessary (TM 10-3930-660-10).
END OF WORK PACKAGE
0147 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals