 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
STEERING CONTROL VALVE REPLACEMENT - CONTINUED
0143 00
REMOVAL - CONTINUED
1.
Disconnect four steering hoses (1) from four elbows
(2) at steering control valve (3).
2.
Remove pilot pressure hose (4) from adapter (5).
3.
If necessary, remove four elbows (3), four adapters (6)
and adapter (5) from steering control valve (3).
54
2
1
3
409-553
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on valve and hoses clean and dry.
Apply film of clean hydraulic oil to all seals as they are installed.
1.
If removed, install four elbows (2), four adapters (6)
3
and adapter (5) to steering control valve (3).
6
2.
Connect hydraulic hoses (1) to steering control valve
(3).
3.
Connect pilot pressure hose (4) to adapter (5) at steer-
ing control valve (3).
4.
Connect four steering hoses (1) to four elbows (2) at
5
valve (3).
2
409-554
5.
Install steering control valve (3) to steering column (4).
6.
Install steering column (WP 0137 00).
7.
Install turn signal switch (WP 0093 00).
8.
Install steering wheel (WP 0136 00).
9.
Start engine (TM 10-3930-660-10).
10.
With engine running, cycle steering wheel five complete turns right and left to bleed air from control valve (TM 10-
3930-660-10).
11.
Check for proper operation and leaks (TM 10-3930-660-10).
END OF WORK PACKAGE
0143 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals