 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TIE ROD ADJUSTMENT - CONTINUED
0138 00
ADJUSTMENT - CONTINUED
3.
Mark front thread surface (A) of each tire on the axle with mark centered on thread width and at same level as distance
from ground to center of axle hub.
4.
Mark rear thread surface (B) of each tire on the axle
with mark centered on tread width and at same level as
distance from ground of center of axle hub.
5.
Measure the distance (X) between the two marks on
the front tread surfaces (A) of tires made in step 3.
A
B
409-539
6.
Measure the distance (Y) between the two marks on the rear tread surfaces (B) of tires made in step 4.
7.
Distance (X) between marks on front of tires should
A
measure 0 to 1/8 in. (0 to 3.175 mm), less than dis-
A
tance (Y) between marks on rear of tires.
B
B
A
A
409-540
8.
If toe-in specifications outlined in step 7 are not met, adjust tie rod as described in step 9 thru 12.
0138 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals