 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
STEERING COLUMN REPLACEMENT - CONTINUED
0137 00
INSTALLATION
NOTE
Support steering control valve and steering column as necessary during installation so these parts do not
drop prior to installation of capscrew and lockwasher.
1.
If necessary, push steering control valve (3) to one side to provide room for installation of steering column (4).
2.
Carefully position steering column (4) through access hole at base of dashboard and through column hole on dashboard.
NOTE
Hose connections for control valve are on the right side.
3.
Position steering control valve (3) on steering column
(4). Turn steering column shaft as necessary to engage
splines.
4.
Align capscrew holes on valve (3) and column (4).
1
2
4
3
409-536
NOTE
Apply loctite to threads of capscrews.
5.
Secure steering control valve (3) and column (4) to dashboard with four new lockwashers (2) and four capscrews (1).
Torque capscrews in a crisscross pattern to 15 lb-ft (20 Nm).
6.
Install steering wheel (WP 0136 00).
7.
Install turn signal switch (WP 0093 00).
END OF WORK PACKAGE
0137 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals