 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BRAKE CONTROL VALVE MAINTENANCE - CONTINUED
0131 00
REMOVAL - CONTINUED
NOTE
Hose is connected directly to accumulator. Plug hose with a #12 plug immediately after disconnecting from
valve.
4.
At service brake control valve (6), tag and disconnect
hose (7) from elbow (8).
17
5.
Tag and disconnect hose (9 and 10) from tee (11) at
15
18
valve (6).
16
6.
Tag and disconnect hose (12 and 13) from tee (14) at
14
valve (6).
13
7.
Tag and disconnect hose (15) from adapter (16) at
6
valve (6).
7
8.
Tag and disconnect hose (17) from elbow (18) at valve
12
(6).
8
10
11
9
409-507
NOTE
Support service brake control valve so it does not drop during hardware removal.
9.
Remove three screws (19) and three lockwashers (20) securing valve (6) to bracket (23). Discard lockwashers.
10.
Remove valve (6) from bracket (23).
11.
Loosen nuts (20 and 21) on pushrod pin (3).
12.
Remove clevis (4) from pushrod pin (3).
13.
Remove pushrod pin (3) from pushrod (22).
14.
Remove nuts (20) and (21) from pushrod pin (3).
15.
Tag and remove elbow (8) from valve (6).
16.
Tag and remove tee (14) from valve (6).
17.
Tag and remove adapter (16) from valve (6).
20
18.
Tag and remove elbow (18) from valve (6).
3
22
4
21
19
20
6
23
409-508
0131 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals