 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION OIL FILTER HEAD ASSEMBLY REPLACEMENT- CONTINUED
0120 00
REMOVAL
1.
Unscrew and remove transmission oil filter element
7,8
(1) from transmission oil filter head (2). Discard trans-
2
mission oil filter element.
4
6
2.
Remove hose (3) and elbow (4) from filter head (2).
3.
Remove hose (5) from elbow (6) from filter head (2).
3
NOTE
5
Support filter head (2) so it does not drop
during hardware removal.
1
4.
Remove three screws (7) and lockwashers (8). Discard
lockwashers.
409-469
5.
Remove filter head (2) from vehicle.
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on filter head and hoses clean and
dry. Apply film of clean hydraulic oil to all seals as they are installed.
1.
Position and support filter head (2) on vehicle. Secure filter head with three new lockwashers (8) and three screws (7).
2.
Install elbow (6) and hose (5) to filter head (2).
3.
Install elbow (4) and hose (3) to filter head (2).
4.
Apply a thin coating of fresh oil to the seal on the new transmission oil filter element (1) and on the threads of filter head
(2).
5.
Screw on the new transmission oil filter element (1) until seal of new transmission oil filter element (1) contacts filter
head (2).
6.
Tighten new transmission oil filter element (1) one-half turn.
7.
Start engine and check for leaks at filter head and at hydraulic connections (TM 10-3930-660-10).
8.
Install transmission cover (WP 0150 00).
END OF WORK PACKAGE
0120 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals