 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BATTERIES MAINTENANCE - CONTINUED
0106 00
REMOVAL - CONTINUED
26
5.
Remove three locknuts (23), washers (24) and retain-
23
ing capscrews (25) securing the battery retaining bar
(26). Remove battery retaining bar.
24
6.
Remove left-hand battery (5) and right-hand battery
(4) from battery box (3).
INSTALLATION
NOTE
If old batteries are to be reinstalled, clean the
tops and terminals of batteries. Refer to Ser-
6
vice. Use wire brush on clamps and terminals
as required.
3
5
Batteries should be installed so the positive
terminal of each battery is oriented toward
25
the left and front of battery box.
1.
Install left-hand battery (5) and right-hand battery (6)
409-4125
in battery box (3).
2.
Position battery retaining bar (26) across batteries (4 and 6). Install three retaining capscrews (25) from under the battery
box (3). Push retaining capscrew (25) up until threads of capscrews (25) are positioned through holes in battery retaining
bar (26).
3.
Secure battery retaining bar (26) to retaining capscrew with three washers (24) and three locknuts (23).
4.
Apply a thin coat of petroleum jelly on all battery terminals and clamps to retard corrosion.
0106 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals