 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
BACK-UP ALARM SWITCH MAINTENANCE - CONTINUED
0104 00
INSTALLATION - CONTINUED
5.
Position lever housing (1) inside console (2).
1
6.
Lower panel (6) to console (2).
6
7.
Position panel (8) on panel (6). Secure panel (8) and
5
lever housing (1) to panel (6) with four capscrews (5).
8.
Secure panel (6) to console (2) with four capscrews
(5).
9.
Install two knobs (3) on shift levers (4).
10.
Connect battery cables (WP 0107 00).
7
8
3,4
2
409-374
ADJUSTMENT
NOTE
Back-up alarm switch should be adjusted so that back-up alarm sounds only when travel select lever is in
reverse position.
1.
Turn engine start switch to the ON position, but do not
start engine.
NOTE
Be sure blackout lights are switched OFF.
11
2.
Loosen nut (12).
3.
Move back-up alarm switch (11) up or down as
required so that back-up alarm only sounds when
12
travel select lever is in "Reverse" position.
4.
Tighten nut (12).
409-377
END OF WORK PACKAGE
0104 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals