 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TURN SIGNAL SWITCH REPLACEMENT - CONTINUED
0093 00
INSTALLATION
1.
If removed, install grommet (11) to dashboard.
7
2.
From top of dashboard, push turn signal switch cable
8
(7) through grommet (11).
3
3.
Connect male connectors (8) of cable (7) to female
2
connectors (9) of vehicle wiring harness (10) as
11
tagged during removal.
1
4
9
NOTE
Apply loctite to threads of screws.
4.
Install dashboard access cover (6) with four screws
(5).
5.
Position and support turn signal switch (3) on steering
column (4).
6.
Secure switch (3) with clamp (2) and two screws (1).
10
5
6
409-4031
7.
Connect battery cables (WP 0107 00).
8.
Turn engine start switch to the ON position. DO NOT start the engine (TM 10-3930-660-10).
9.
Move turn signal switch lever to the left. Check that turn signals on both front and rear left-hand fenders are flashing.
10.
Move turn signal switch lever to the right. Check that turn signals on both front and rear right-hand fenders are flashing.
11.
Turn engine start switch off (TM 10-3930-660-10).
END OF WORK PACKAGE
0093 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals