 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
STE/ICE-R PULSE TACHOMETER AND DRIVE ASSEMBLY REPLACEMENT - CONTINUED
0089 00
REMOVAL - CONTINUED
3.
Remove right-hand fan guard (WP 0060 00).
4.
Remove two screws (7) and two flatwashers (8) securing tachometer drive (6).
5.
Remove tachometer drive (6), gasket (9), cover (10) and gasket (11) from engine as an assembly. Discard gaskets.
6.
If necessary, remove hub (12) from shaft (13).
7.
If necessary, remove tachometer drive (6) and gasket (9) from cover (10). Discard gasket.
INSTALLATION
1.
If removed, install hub (12) onto shaft (13).
2.
If removed, install drive (6) and new gasket (9) to
cover (10).
3.
Position new gasket (11) on cover (10). Install new
gasket, cover, new gasket (9) and tachometer drive (6)
to engine as an assembly, and secure with two screws
(7) and two flatwashers (8).
4.
Install right-hand fan guard (WP 0060 00).
8
11
10
5.
Insert pulse tachometer (2) into tachometer drive (6).
Hand-tighten nut (5) on pulse tachometer (2) and then
7
further tighten nut 1/4 to 1/2 additional turn.
6.
Insert male connector (1) of pulse tachometer (2) into
female connector (3) of vehicle wiring harness (4).
12
13
409-343
7.
Connect negative battery cable (WP 0107 00).
9
6
8.
Run engine and check for proper operation and leaks
(TM 10-3930-660-10).
6
2
1
5
3
4
409-4121
END OF WORK PACKAGE
0089 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals