 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
STE/ICE-R FUEL FILTER DIFFERENTIAL PRESSURE SWITCH REPLACEMENT - CONTINUED
0088 00
REMOVAL - CONTINUED
6.
If necessary, remove two screws (11), two lockwashers (12), bracket (10), and two starwashers (13). Discard lockwash-
ers (12) and starwashers (13).
7.
If necessary, remove hose (1), adapter (14) and fluid
passage bolt (15) from engine.
8.
If necessary, remove hose (2) at adapter (16).
16
INSTALLATION
1.
If removed, install hose (2) at adapter (16).
10
13
12
NOTE
2
During step 2, apply loctite to threaded
15
end of adapter that screws into fluid pas-
11
14
sage bolt.
1
409-340
2.
If removed, install fluid passage bolt (15), adapter (14)
and hose (1).
3.
If removed, position bracket (10) on engine and secure with two new starwashers (13), two new lockwashers (12) and
two screws (11).
NOTE
During step 4, apply loctite to threaded end of adapter and elbow that screws into switch.
4.
If removed, install elbow (3) and adapter (4) to switch (5).
NOTE
Position switch on bracket as noted during
removal.
5.
Position switch (5) on bracket (10) and secure with
9
two new tie straps (9).
6.
Insert male plug (6) of switch (5) into female plug (7)
of vehicle wiring harness (8).
10
7.
Connect two fuel lines (1) and (2) to elbow (3) and
5
adapter (4) at switch (5) as tagged.
2
8.
Connect battery cables (WP 0107 00).
4
1
7
36 8
409-341
END OF WORK PACKAGE
0088 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals