 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
ACCELERATOR CABLE MAINTENANCE (165 HP) - CONTINUED
0049 00
ADJUSTMENT
NOTE
With fuel injection pump linkage tight against
idle stop screw, clevis pin should fit freely
through clevis of cable. If not, adjust cable.
1.
If necessary, adjust accelerator cable (1).
2.
Loosen nuts (19) and (23) at bracket (21).
3.
Reposition cable (1) until fuel injection pump linkage
(12) is in neutral position.
4.
Tighten nuts (19) and (23).
12
23
1
19
21
409-1780
5.
Loosen jamnut (24) and turn stop screw (25) on accel-
erator pedal (2) fully clockwise.
2
6.
Depress accelerator pedal (2) fully and hold. Turn stop
screw (25) counterclockwise until head of stop screw
touches pedal.
25
7.
Release accelerator pedal (2) and tighten jamnut (24).
8.
Use STE/ICE-R to check engine rpm at idle and at full
24
throttle (WP 0008 00). Readjust cable (1) and stop
screw (25) as required until engine rpm readings are
within limits.
TR00382
409-1781
END OF WORK PACKAGE
0049 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals