 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
ACCELERATOR CABLE MAINTENANCE (152 HP) - CONTINUED
0048 00
INSTALLATION - CONTINUED
4.
At accelerator pedal (2), install clevis (5) of cable (1) to linkage (6) of pedal with clevis pin (4) and spring clip (3).
5.
Install spring (7) to linkage (6).
6.
Install cable (1) to pedal (2) with two new locknuts (8), two flatwashers (9) and cable clamp (10).
Check adjustment of accelerator cable (1) and adjust, if necessary. Refer to Adjustment.
7.
ADJUSTMENT
1.
With linkage (15) tight against the idle stop screw
(19), clevis pin (13) should fit freely through clevis
1
(14) of cable (1). If not, adjustment is required.
13
19
2.
Loosen nuts (16 and 20) at bracket (18).
3.
Reposition cable (1) until clevis pin (13) fits freely
through holes in clevis (14) and linkage (15).
4.
Tighten nuts (16 and 20) at bracket (18).
15
11
14
16
20
18
409-209
0048 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals