 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
FUEL FILTER AND HEAD MAINTENANCE (152 HP) - CONTINUED
0042 00
SERVICE
1.
To drain primary filter element (1), open drain (2) at
base.
NOTE
3
Drain primary fuel filter when water is present
in fuel/water separator or after 50 hours of oper-
ation. Be sure fuel tank is at least 1/4 full.
2.
Operate hand lever on fuel transfer pump (3) until all
water is drained from primary filter element (1) and
only diesel fuel is present.
3.
Close drain (2) at base of primary filter element (1).
409-198
1
2
4.
Turn primary filter element (1) counterclockwise and
remove from fuel filter head (5).
5
5.
Turn secondary filter element (4) counterclockwise
and remove from fuel filter head (5).
7
6.
Discard old filter elements (1 and 4).
7.
Remove and discard seals (6 and 7) from filter head
(5).
8.
Clean fuel filter head (5) where old filter elements (1)
6
and (4) were attached.
4
9.
Install new seals (6 and 7) to filter head (5).
1
10.
Fill new filter elements (1 and 4) with clean fuel.
409-199
Lubricate outer seals on new filter elements (1 and 4)
with clean oil.
11.
Turn secondary new filter element (4) clockwise on fuel filter head (5) until tight.
12.
Turn primary new filter element (1) clockwise on fuel filter head (5) until tight.
0042 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals