 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HIGH PRESSURE FUEL HOSES AND TUBES REPLACEMENT (165 HP) - CONTINUED
0035 00
INSTALLATION - CONTINUED
WARNING
To prevent danger of fire caused by fuel spilling on hot exhaust manifold, do not bleed fuel tubes if
engine is hot. Failure to observe this precaution could result in injury or death to personnel.
Safety glasses must be worn when working on pressurized systems. Failure to observe this precaution
could result in serious injury.
NOTE
Ensure auxiliary fuel shut-off switch is in the ON position.
7.
Crank engine until fuel is flowing from all six fuel tubes (2) at injectors (3). Tighten six nuts (1).
8.
Bleed fuel tubes (2) at injectors (3), one at a time, until
engine starts and runs smoothly. Repeat steps 10-12
2
for each fuel tube as required.
9.
Loosen nuts (1).
1
10.
Crank engine until fuel flows from tube (2).
11.
Using wrench and torque wrench, torque nuts (1) to 18
lb-ft (24 Nm).
3
12.
Start engine, check for leaks and proper operation
(TM 10-3930-660-10).
TR00348
409-1763
END OF WORK PACKAGE
0035 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals