 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TURBOCHARGER OIL HOSES AND TUBES REPLACEMENT (165 HP) - CONTINUED
0031 00
REMOVAL
1.
Disconnect turbocharger oil supply hose (1) from tur-
bocharger (2) and oil filter head adapter (3).
2.
Remove two screws (4) from oil drain tube assembly
(5) and turbocharger (2).
3.
Remove clamp (6), drain tube assembly (5), and gas-
ket (7) from pipe (8) and turbocharger (2). Discard
gasket.
TR00004
4.
Remove clamp (9) and separate hose (10) from tube
1
5
4
(5).
5.
Remove pipe (8) from engine block (11).
2
INSTALLATION
1.
Apply sealing compound to engine block end of pipe
2
(8).
7
2.
Install pipe (8) in engine block (11).
3.
Install hose (10) on tube (5) with clamp (9). Torque
clamp to 6 lb-ft (8 Nm).
4.
Position gasket (7), clamp (9), and drain tube assem-
bly (5) on turbocharger (2) and pipe (8).
5.
Install two screws (4). Torque screws to 18 lb-ft (24
3
Nm). Torque clamp (6) to 6 lb-ft (8 Nm).
6.
Connect turbocharger oil supply hose (1) to turbo-
charger (2) and oil filter head adapter (3).
7.
Start engine (TM 10-3930-660-10) and check for
leaks.
5
10
8
9
6
11
TR00182
409-1760
END OF WORK PACKAGE
0031 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals