 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
FUEL TRANSFER PUMP MAINTENANCE (165 HP) - CONTINUED
0023 00
REMOVAL
NOTE
9
8
7
Perform step 1 below only if fuel transfer pump
4
was not tested. If fuel transfer pump was tested,
7
fuel line will already be disconnected.
5
10
3
1
1.
Disconnect fuel hose (1) from adapter (3).
2.
Remove fuel tube (4) from adapter (5).
3.
Remove two screws (6), fuel transfer pump (2), two
gaskets (7) and spacer (8) from engine block (9). Dis-
card gaskets.
2
6
409-1745
TR00160
4.
Remove adapters (3) and (10) from fuel transfer pump (2).
INSTALLATION
NOTE
12
2
Ensure gasket mating surface of engine block is
1
clean prior to installation of transfer pump.
11
1.
Install adapters (3 and 10) on fuel transfer pump (2).
2.
Install new gaskets (7), spacer (8), and fuel transfer
pump (2) on engine block (9) with two screws (6).
Torque screws to 18 lb-ft (24 Nm).
3.
Install fuel tube (4) on adapter (5).
13
4.
Connect fuel hose (1) on adapter (3).
5.
Bleed fuel hose (1).
6.
Loosen hose (11) at elbow (12).
7.
Operate button (13) on transfer pump (2) until fuel
flowing from elbow (12) is free of air.
8.
Tighten hose (11) on elbow (12).
9.
Run engine and check for proper operation (TM 10-
3930-660-10).
TR00161
409-1746
END OF WORK PACKAGE
0023 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals