 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
FUEL TRANSFER PUMP MAINTENANCE (152 HP) - CONTINUED
0022 00
REMOVAL
NOTE
The fuel transfer pump is reached through the
right-hand engine access door.
1.
Remove fuel hose (1) from fitting (2) at transfer pump
(3).
2.
Disconnect fuel line (4) from transfer pump (3).
3.
Remove two screws (5) and transfer pump (3) from
engine.
4.
Remove gasket (6) from engine and discard.
4
5.
If necessary, remove fitting (2) from transfer pump
(3).
2
1
6
3
5
409-157
INSTALLATION
1.
If removed, install fitting (2) to transfer pump (3).
8
2.
Clean mounting surface of engine.
3.
Position new gasket (6) on engine.
4.
Position transfer pump (3) on engine and torque
screws (5) to 6 lb-ft (8 Nm).
5.
Connect fuel line (4) to transfer pump (3).
3
7
6.
Install fuel hose (1) to fitting (2) at transfer pump (3).
9
7.
To bleed fuel line (4), loosen hose (7) at fitting (8).
8.
Operate hand lever (9) on transfer pump (3) until fuel
flowing from fitting (8) is free of air.
9.
Tighten hose (7) at fitting (8).
409-158
0022 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals