 |
|||
|
|
|||
|
Page Title:
ENGINE ASSEMBLY SERVICE - CONTINUED |
|
||
| ||||||||||
|
|
 TM 10-3930-660-24-1
ENGINE ASSEMBLY SERVICE - CONTINUED
0012 00
SERVICE - CONTINUED
4.
Place container under filter element (4).
5.
Slowly unscrew and remove filter element (4) from
filter head (5). Discard filter element.
6.
Clean surface of filter head (5) to remove any possible
7.
Lubricate seal on new filter element (4) with clean oil.
CAUTION
Do not overtighten new filter element. Over-
tightening may distort the filter element threads
and seal.
8.
Screw new filter element (4) onto filter head (5) until
top of element (4) makes contact with head (5).
5
Tighten element (4) an additional 3/4 turn.
4
409-141
9.
Install oil drain plug (1) and new flatwasher (2) to engine oil pan (3).
NOTE
Engine oil capacity is 15 qt (14.2 L) including
filter element.
10.
Remove cap (7) from engine oil filler (6) and add oil.
Install cap (7).
11.
Start engine and check for leaks (TM 10-3930-660-
10).
7
6
1,2
3
409-142
END OF WORK PACKAGE
0012 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals