GENERAL PMCS PROCEDURES - CONTINUED - TM-10-3930-660-24-10168

TM 10-3930-660-24-1

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

INTRODUCTION - CONTINUED

0010 00

GENERAL PMCS PROCEDURES - CONTINUED

CAUTION

Operation is allowable with Class I and Class II leakage. WHEN IN DOUBT, NOTIFY YOUR SUPERVI-

SOR. When operating with Class I or Class II leaks, check fluid levels more frequently. Class III leaks must

be reported immediately to your supervisor. Failure to do this will result in damage to vehicle and/or compo-

nents.

INITIAL SETUP

Materials (WP 0324 00) - Continued

General

Detergent (Item 17, WP 0324 00)

This setup lists tools, materials, and personnel

Grease, GAA (Item 20, WP 0324 00)

required for Unit Maintenance PMCS and lubri-

cation.

Oil, lubricating, OE/HDO-15W/40 (Item 30, WP

Tools (WP 0325 00)

Oil, lubricating, OEA (Item 31, WP 0324 00)

Oil, lubricating, GO-80W/90 (Item 32, WP 0324

Tool kit, general mechanic's (Item 39, WP 0325 00)

Shop equipment, common no.1 (Item 20, WP 0325

Oil, lubricating, OE/HDO-10 (Item 33, WP 0324

Petrolatum, technical (Item 37, WP 0324 00)

Shop equipment, common no. 2 (Item 19, WP 0325

Rags (Item 40, WP 0324 00)

Cloth, abrasive, emery, fine

Materials (WP 0324 00)

Oil sampling kit

Anti-freeze (Item 5, WP 0324 00)

Personnel

Driver/Operator

Cleaning compound, solvent (Item 10, WP 0324

Unit Maintenance Mechanic

0010 00-4