CONTENTS OF THIS MANUAL

TM 10-3930-660-24-1

If you cannot find what you are looking for in the Table of Contents, refer to the alphabetical Index at the back of

the manual.

Chapter 1, Introductory Information with Theory of Information, provides general information on the manual and the

equipment.

Chapter 2 covers Troubleshooting Procedures. WP 0005 00 contains a Troubleshooting Symptom Index. If the machine

malfunctions, this index should always be consulted to locate the appropriate troubleshooting procedure.

Chapter 3 deals with Unit (Field) Maintenance Procedures: Major areas covered are Preventive Maintenance Checks and

Services (PMCS), Service Upon Receipt and all maintenance procedures authorized by the MAC for this manual, orga-

nized in Functional Group Code (FGC) sequence. Refer to the Table of Contents for a complete listing of maintenance

procedures.

Chapter 4 covers Direct Support Maintenance information work packages. Before performing any maintenance proce-

dure, read WP 0312 00, General Maintenance Instructions, and/or WP 0313 00, Electrical General Maintenance Instruc-

tions.

Chapter 5 covers General Support Maintenance instruction.

Chapter 6 covers General Maintenance Instructions.

Chapter 7 includes Supporting Information: References; Maintenance Allocation Chart (MAC) Introduction; Mainte-

nance Allocation Chart (MAC); Expendable and Durable Items List; Tool Identification List; and Illustraated List of Man-

uafactured Items.

FEATURES OF THIS MANUAL

WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in BOLD print as a

visual aid.

WARNING

A WARNING indicates a hazard which may result in death or serious injury.

CAUTION

A CAUTION is a reminder of safety practices or directs attention to usage practices that may result in dam-

age to equipment.

NOTE

A NOTE is a statement containing information that will make the procedures easier to perform.

Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.

Within a procedural step, reference may be made to another work package in this manual or to another manual. These ref-

erences indicate where you should look for more complete information.

If you are told: "Replace engine oil filter (WP 0012 00)," go to Work Package 0012 00 in this manual for instructions on

replacing the filter.

Illustrations are placed after, and close to, the procedural steps to which they apply. Callouts placed on the art may be text

or numbers, or both; whichever method is easier for the soldier.

Numbers located at lower right corner of art (e.g., 409-001; 409-002, etc.) are art control numbers and are used for track-

ing purposes. Disregard these numbers.

Dashed leader lines used in the Lubrication Chart (WP 0010 00) indicate lubrication points that are located on both sides

of the equipment.

Technical instructions include metric units as well as standard units. For your reference, a Metric Conversion Chart is

located on the inside back cover of the manual.

xii