| |
TM10-3930-660-20
d .
e.
f.
Seal all openings in the engine including the air intake,
exhaust outlet, and
crankcase breather tube.
Use an accurate hydrometer to check engine coolant.
Make sure the coolant has
the proper mixture
for expected temperatures.
Refer to table 20-1 on
page 20-2.
Check state and local laws governing weight, width, and length of
load.
WARNING
Check travel route for overpass clearances.
Ensure that there will be adequate
clearance.
Figure 20-1.
Lifting and Tie-Down Locations
20-5/(20-6 Blank)
|
