| |
TM10-3930-660-20
19-3.
HYDRAULIC OIL SIGHT GAGES - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Tool Kit, Automotive Mechanics
Materials/Parts
Loctite 59241 (App, C, Item 42)
Equipment Condition
Vehicle parked on level ground.
Hydraulic tank drained below level
of lower sight gage.
To prevent spillage of hydraulic oil,
the hydraulic tank (2) must be
partially drained until the hydraulic
oil level is lower than the sight gage
being replaced. See para. 5-10.
UNSCREW SIGHT GAGE(S) (1) FROM SIDE
OF HYDRAULIC TANK (2).
INSTALLATION
Apply Loctite 59241 to sight gage(s) (1)
as
1.
2.
installed.
SCREW SIGHT GAGE(S) (1) INTO SIDE OF
HYDRAULIC TANK (2).
FILL HYDRAULIC TANK (2), PARA. 5-10.
19-2
|
