TM10-3930-660-20 18-31. FORK  SIDESHIFT  CYLINDERS  - REPLACE (Cont’d) c. d. e. f. g. h. i. Install socket head screw (9) and retainer (10) in left side of fork carriage  (3).   Torque socket head screw (9) to 46 lb. ft. Install two hydraulic lines (8) on right fork sideshift cylinder (1). Refer to tags for identification of hydraulic lines (8). Shift left fork (2) to left side of fork carriage (3). Align pin (4) hole in right fork (5) with access hole (6) in fork carriage  (3). Extend right fork sideshift cylinder (1) until it aligns with access hole (6) in fork carriage end pin (4) hole in right fork (5)  l Install pin (4) in right fork sideshift cylinder (1). Install new cotter pin (7) in left 4. 5. 6. side of pin (4). INSTALL FORK AUTOLEVELER SWITCH AND COVER, PARA. 8-55. CYCLE FORK SIDESHIFT CYLINDERS FIVE TIMES TO BLEED ANY AIR IN HYDRAULIC SYSTEM, TM10-3930-660-10. a. Start engine, TM10-3930-660-10. b. Operate fork sideshift function and sideshift forks five times. c. Stop engine and relieve hydraulic pressure by operating frame tilt controls, TM10-3930-660-10. IF NECESSARY, BLEED HYDRAULIC PUMPS, PARA. 18-3. 18-125