TM10-3930-660-20 18-18. FORK BUSHINGS - REPLACE This task covers: a. Removal b. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics #80 grit emery paper (App. C, Item 37) Chlorinated Solvent (APP. C, Item 47) Shop Equipment, Automotive Loctite #609 (App. C, Item 43) Maintenance and Repair, Common #l Less Power Equipment  Condition Forks removed, para. 18-17. REM0VAL 1. REMOVE BUSHING (1) FROM FORK BORE (2). Carefully and slowly apply hydraulic pressure to push fork bushing (1) from fork bore (2). INSTALLATION 1.   ROUGH TINNED OUTSIDE DIAMETER OF FORK BUSHING (1). Using #80 grit emery paper, rough up tinned outside diameter of fork bushing  (l). Cleaning solvents are potentially dangerous to personnel and property. Avoid skin contact by wearing rubber gloves. Avoid prolonged inhalation. Make sure work area provides adequate ventilation. Do not use near open flame. 18-71