| |
TM10-3930-660-20
18-17. FORKS - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Materials/Parts
Tool Kit, Automotive Mechanics
Cotter Pins (1)
Loctite 242 (App. C, Item 39)
Lifting Device, 5 Ton Capacity
Personnel Required
Cap and Plug Set
Two
Equipment Condition
Vehicle parked on level ground.
Reference
TM10-3930-660-10
Parking brake set.
Wheels blocked.
Forks level and waist high.
When working under the boom, always use
blocks, jackstands or other rigid and
stable supports. Combined weight of boom
and MLRS attachment is approximately
6300 pounds. Failure to adequately
support the boom could result in severe
injury or death.
1. REMOVE AND DISCARD COTTER PINS (1).
a. Start engine, TM10-3930-660-10.
b. Sideshift both forks (2) until they
are approximately one foot from
sides of fork carriage (3).
c. Stop engine, TM10-3930-660-10.
d. Remove cotter pins (1) which secure
fork attaching pins (4) to forks
(2). Discard cotter pins (l).
Fork autoleveler switch must be removed
first if right-hand fork is to be
removed, para. 8-21.
18-67
|
