| |
TM10-3930-660-20
17-11.
DATA PLATES - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Materials/Parts
ShoP Equipment, Automotive
Adhesive (App. C, Item 1)
Maintenance, Cnmmon #2 Less Power
Tacks (1)
Equipment Condition
Vehicle parked on level ground.
This is a general procedure that applies
to data plates mounted with drive pins
on vehicle.
1. USE DRILL TO REMOVE DRIVE PINS (1)
SECURING DATA PLATE (2).
2. REMOVE DATA PLATE (2) FROM VEHICLE.
INSTALLATION
Be sure vehicle mounting surface and
back of data plate (2) are clean and
dry.
Data plate on fuel tank adjacent to fuel
filler has self-adhesive back and
does not require additional adhesive
for installation.
1.
2.
3*
APPLY ADHESIVE TO BACK OF DATA PLATE
(2).
POSITION DATA PLATE (2) ON VEHICLE.
SECURE DATA PLATE (2) TO VEHICLE WITH
NEW DRIVE PINS (1).
17-29
|
