| |
TM10-3930-660-20
17-9.
HEATER TEMPERATURE CONTROL VALVE AND CABLE - REPLACE (Cont‘d)
3. IF NECESSARY, REMOVE HEATER CONTROL
CABLE (1) FROM SIDE CONSOLE (6).
a.
b.
c.
Remove electric joystick to
provide access to nut (7), para.
8-19.
Remove nut (7) securing cable (1)
to side console (6).
Pull cable (1) out through hole
in console (6).
INSTALLATION
1. IF REMOVED, INSTALL HEATER CONTROL
VALVE CABLE (1) TO SIDE CONSOLE.
a.
b.
Apply
c.
d.
Push end of cable (1) through hole
in side console (6) and through
center of nut (7).
Push cable (1) through hole in cab
floor above
(2).
Loctite 242
heater control valve
to threads of nut (7).
Secure cable (1) to side console
(6) with nut (7).
Install electric joystick, para.
8-19.
17-24
|
