TM10-3930-660-20 17-3. PRONT WINDSHIELD WIPER ASSEMBLY - REPLACE/REPAIR (Cont‘d) DISASSEMBLY REMOVE PARTS (27 ) THROUGH (33) FROM FRONT WIPER MOTOR ASSEMBLY (3). a. Remove two spring clips (27), two spacing washers (28) and connecting link (29). b. Remove nut (30), drive arm (31), and washer  (32). c. Remove three screws (33) and separate motor and bracket components. ASSEMBLY INSTALL PARTS (27) THROUGH (33) TO FRONT WIPER MOTOR ASSEMBLY (3). a. b. c. Position bracket and motor components of wiper motor assembly (3) together, and secure with three screws (33). Install washer (32), and drive arm (31) . Secure with nut (30). Install connecting link (29) and secure with two spacing washers (28) and spring clips (27). 17-5