TM1O-393O-66O-2O 16-17. TOOL BOX DOOR LATCH - REPLACE This task covers: a. Removal b.  Installation Initial  Setup Tools Tool Kit, Automotive Mechanics Equipment  Condition Vehicle parked on level ground. REMOVAL 1. OPEN TOOL BOX DOOR (l). 2. MEASURE POSITION OF LATCHING LEVER (2) ON SHAFT. RECORD MEASUREMENT FOR REFERENCE DURING INSTALLATION. 3. REMOVE TOOL BOX LATCH (PARTS 2 THROUGH 7) FROM TOOL BOX DOOR (l). a. Remove jam nut (3), lockwasher (4), latching lever (2), second lockwasher (4), and second jam nut (3). b. Remove hex nut (5), lockwasher (6), and handle (7). INSTALLATION 1. INSTALL TOOL BOX LATCH (PARTS 2 THROUGH 7) TO TOOL BOX DOOR (l). a. Secure handle (7) with lockwasher (6) and hex nut (5). Install nuts (3) so that latching lever (2) is properly positioned on shaft. Refer to measurement taken in step 2 of remova1. b. Install jam nut (3), lockwasher 3. 16-28 (4), latching lever (2), second lockwasher (4), and second jam nut (3). REMOVE TOOL BOX THROUGH 7) FROM LATCH (PARTS 2 TOOL BOX DOOR (1).