| |
TM10-3930-660-20
16-12.
CAB REAR WINDOW - REPLACE (Cont’d)
5. IF NECESSARY, REMOVE LATCH, PARTS (7)
THROUGH (12).
a. Remove shoulder bolt (7) to remove
window catch (8).
b.
c.
Remove knob (9) from bracket (10).
Remove two screws (11), locknuts
(12) and bracket (10) from cab.
Discard locknuts (12).
INSTALLATION
1.
2.
3.
4.
5.
6.
IF REMOVED,
THROUGH (12).
a.
b.
c*
IF
INSTALL LATCH, PARTS (7)
Position bracket (10) on cab and
secure with two screws (11) and two
new locknuts (12).
Install knob (9) on bracket (10).
Position window catch (8) on window
(1) and secure with shoulder bolt
(7) .
REMOVED, INSTALL SEAL (6) TO CAB
OPENING.
INSTALL FOUR NEW LOCKWASHERS (4) AND
FOUR NEW LOCKNUTS (3) TO SECURE REAR
WINDOW HINGE (5) TO CAB.
HOLD REAR WINDOW (1) TO LEFT OF CAB
OPENING AT APPROXIMATELY 30°. SLIDE
TOP OF WINDOW INTO HINGE (5).
LOCK REAR WINDOW (2).
INSTALL REAR WIPER ARM (1) ON SHAFT OF
WIPER MOTOR.
16-22
|
