TM10-3930-660-20 16-9. FENDER BRACES - REPLACE This task covers: a. Removal b. Installation Initial  Setup Tools Tool Kit, Automotive Mechanics Materials/Parts Lockwashers (5 and 7) Tie Straps (2) Equipment  Condition Vibration Pads (9) Vehicle parked on level ground. Fender removed, para.  16-8. 1. 2. 3. REMOVE FENDER BRACE (1). a. Remove and discard two tie straps (2) securing wire harness (3) to fender  brace  (l). b. Remove two capscrews (4) and two lockwashers (5) to remove fender brace  (1). Discard lockwashers (5). REMOVE TWO CAPSCREWS (6) AND TWO LOCKWASHERS (7) TO REMOVE FENDER BRACE (8). DISCARD LOCKWASHERS (7). ON REAR FENDER BRACES ONLY,  REMOVE AND DISCARD VIBRATION PADS (9) IF DAMAGED  OR  WORN. INSTALLATION NOTE Apply Loctite 242 to threads of all capscrews before installation. 1. INSTALL FENDER BRACE (8) WITH TWO LOCKWASHERS (7) AND TWO CAPSCREWS (6)  . 2. INSTALL FENDER BRACE (1). a. Position brace (1) on vehicle and secure with two new lockwashers (5) and two capscrews (4). 16-14