| |
TM10-3930-660-20
15-4.
PINTLE HOOK - REPLACE/REAIR (Cont’d)
c. Remove castle nut (8) and bolt (9)
and latch (5) from pintle hook (3).
2. IF NECESSARY, REMOVE SCREW (10) AND
CHAIN AND PIN ASSEMBLY (6) FROM
LATCH (5).
ASSEMBLY
1. IF NECESSARY, SECURE CHAIN AND PIN
ASSEMBLY (6) WITH SCREW (10).
2. INSTALL LATCH (5) ON PINTLE HOOK
(3) .
a. Place latch (5) in position on
pintle hook (3) and insert bolt
(10) .
b. Secure bolt (10) and latch (5)
with castle nut (9) and new
cotter pin (7)0
INSTALLATION
WARNING
Pintle hook (3) weighs 36 pounds. Use
caution when installing in
counterweight (4) to avoid personal
injury or damage to equipment.
1. SLIDE PINTLE HOOK (3) INTO HOLE ON
COUNTERWEIGHT (4).
2. SECURE PINTLE HOOK (3) IN
COUNTERWEIGHT (4) WITH CASTLE NUT
(2) AND NEW COTTER PIN (1).
30 IF NECESSARY, INSTALL LOAD BACKREST
IN STORAGE POSITION,
TM10-3930-660-10.
15-5/(15-6 Blank)
|
