| |
TM10-3930-660-20
14-11.
STEERING SELECT VALVE - REPLACE/REPAIR/TEST (Cont’d)
TESTING STEERING SELECT VALVE SOLENOIDS
1. TAG AND REMOVE ELECTRICAL LEAD (1) AT
PLUG (2) FROM SOCKET TERMINAL OF
SOLENOID (14 ) TO BE TESTED.
2.
3.
4.
a.
b.
Tag electrical lead (1) at
solenoid (14).
Pull plug (2) from socket terminal
of solenoid (14).
PERFORM CONTINUITY TEST
(14) .
a. Check for continuity
ohmmeter between the
ON SOLENOID
with an
two
connections on socket terminal of
solenoid (14).
b. If continuity is not indicated,
solenoid is defective and must be
replaced. Refer to disassembly and
assembly sections of this
paragraph.
CONNECT ELECTRICAL LEAD (1) TO
SOLENOID (14).
Insert plug (2) of electrical lead
(1) into socket terminal of solenoid
(14) as tagged.
CONNECT NEGATIVE BATTERY CABLE, PARA. 8-44.
14-27/(14-28 Blank)
|
