TM10-3930-660-20 14-11. STEERING SELECT VALVE -  REPLACE/REPAIR/TEST  (Cont’d) DISASSEMBLY 1. 2. REMOVE VALVE BODY (10) FROM VALVE PLATE  (11). a. b. Remove four capscrews (12) and separate valve body (10) from valve plate (11). Remove and discard four O-rings (13) from between ports of valve body (10) and valve plate (11). REMOVE TWO SOLENOIDS (14) FROM VALVE BODY  (10). a. Remove four capscrews (15) from each solenoid (14) and separate solenoids (14) from valve body (10). b. Remove and discard one O-ring (16) from between each solenoid (14) and valve body (10). ASSEMBLY 1. 2. INSTALL TWO SOLENOIDS (14) TO VALVE BODY  (10). a. b. Position one new O-ring (16) between each solenoid (14) and valve body (10). Secure each solenoid (14) to valve body (10) with four capscrews (15). INSTALL VALVE BODY (10) TO VALVE PLATE  (11). a. b. Position four new O-rings (13) between ports of valve body (10) and valve plate (11). Secure valve body (10) to valve plate (11) with four capscrews (12) l 14-25