| |
TM10-3930-660-20
12-9.
SERVICE BRAKE SYSTEM HOSES, LINES, AND FITTINGS - REPLACE/REPAIR (Contd)
2. CAREFULLY REMOVE HOSES (3) FROM
VEHICLE AS REQUIRED.
Brake system hydraulic hoses can be
repaired by installing new end fittings.
Refer to TM9-4940-468-14 for instructions
on how to repair hydraulic hoses.
INSTALLATION
NOTE
Remove caps and plugs as hoses are
installed.
Wipe all sealing surfaces on
brake components and hoses clean and dry.
Apply film of clean hydraulic oil to all
sealing surfaces as hoses are connected.
1. POSITION HOSES (3) IN FRAME AS NOTED
DURING REMOVAL.
2. INSTALL ELBOW FITTINGS (l), TEE
FITTINGS (2), AND HOSES (3) AS
REQUIRED.
a. Install elbow (1) to service brake
caliper (4).
b. Connect hose (3) to elbow (l).
c. Connect hoses (3) to tee (2).
3. BLEED SERVICE BRAKE SYSTEM,
PARA. 12-5.
4. REMOVE WHEEL CHOCKS.
12-31/(12-32 Blank)
|