TM10-3930-660-20 12-4. PARKING BRAKE LEVER AND CABLE -  ADJUST/REPLACE (Cont’d) 3. 4. 5. DISCONNECT CABLE (1) FROM LEVER (7) IN CAB. a. Remove cotter pin (8), washer (9), and clevis pin (10). Discard cotter  pin  (8). b. Remove nut (11), lockwasher (12), lockwasher (13), capscrew (14), and spacer (15) . Discard lockwashers (12) and (13). C. Remove cable clamp (16) from cable (l). CUT AND REMOVE TIE STRAPS (17) SECURING CABLE (l), AS NECESSARY. NOTE TIE STRAP LOCATIONS FOR USE DURING INSTALLATION. NOTE ROUTING OF CABLE (1) ON VEHICLE CAB AND FRAME FOR USE DURING INSTALLATION AND REMOVE CABLE (1) FROM  VEHICLE. 12-6