TM10-3930-660-20 12-4. PARKING BRAKE LEVER AND CABLE  -  ADJUST/REPLACE This task covers: a. Removal b.  Installation c. Adjustment of parking brake cable Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Cotter Pins (3) (8) Lockwashers (12) (13) (22) (23) Equipment  Condition Tie  Straps  (17) Vehicle parked on level ground. Wheels chocked. Personnel  Required Negative battery cable removed, Two para.  8-44. 1. PLACE PARKING BRAKE LEVER IN THE OFF POSITION. 2. DISCONNECT CABLE (1) FROM PARKING BRAKE ASSEMBLY (2). a. Remove cotter pin (3) and clevis pin (4a) securing clevis (5) to parking brake assembly (2). Discard cotter pin (3). b. Loosen nuts (4b) and (4c) pull cable (1) out of mounting bracket (6). 12-5