TM10-3930-660-20 10-3. PROPELLER SHAFTS, FRONT AND REAR DIFFERENTIAL - REPLACE/REPAIR (Cont’d) 3. INSTALL UNIVERSAL JOINTS (11) AND (5) To a. b. c. d. e. f. PROPELLER SHAFT (1). If removed, install lubrication fitting (20) to universal joint (11) l Align universal joint (11) with yoke (19) on transmission end of shaft  (1). Apply Loctite 242 to four capscrews (17). Secure universal joint (11) to yoke (19) with four new lockwashers (18) and four capscrews (17). Torque capscrews (17) to 44 lb. ft. If removed, install lubrication fitting (16) to universal joint (5) . Align universal joint (5) with yoke (15) on axle end of shaft (1). Apply Loctite 242 to four capscrews (13) . Secure universal joint (5) to yoke (15) with four new lockwashers (14) and four capscrews (13). Torque capscrews (13) to 41 lb. ft. 10-5