TM10-3930-660-20 10-3. PREPELLER SHAFTS, FRONT AND REAR DIFFERENTIAL - REPLACE/REPAIR (Cont’d) Support shaft (1) so it does not drop when capscrews (9) and lockwashers (10) are  removed. 2. REMOVE PROPELLER SHAFT (1) FROM TRANSMISSION (8). a. Remove four capscrews (9) and four lockwashers (10) securing universal joint (11) of shaft (1) to yoke (12) of transmission (8). Discard lockwashers (10). b. Lift to remove shaft (1) from hook (7) on vehicle frame. DISASSEMBLY 1. REMOVE UNIVERSAL JOINTS (5) AND (11) FROM PROPELLER SHAFT (1). a. b. c. Remove four capscrews (13) and four lockwashers (14) securing universal joint {5) to yoke (15) on axle end of shaft (l). lockwashers (14). Separate universal joint yoke  (15). If necessary, remove lubrication Discard 5) from cat  ion fitting (16) from universal joint (5). 10-3