TM10-3930-660-20 9-11. TRANSMISSION CONTROL VALVE LINKAGE - REPLACE This task covers: a. Removal b. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Lockwashers (6, 10, 21) Equipment  Condition Vehicle parked on level ground. Transmission  cable  assemblies removed at transmission control valve, para. 9-4. 1. REMOVE PARTS (2) THROUGH (22) FROM TRANSMISSION CONTROL VALVE (l). a. b. c. d. 2. IF Remove cotter pin (2), flatwasher (3), and pin (4) from upper control valve linkage. Discard cotter pin (2). Remove two bolts (5), two lockwashers (6), and two spacers (7)  securing  bracket  (8). Separate parts (8) through (22) from transmission control valve (1)  . Repeat steps la through 1C for lower control valve linkage parts. NECESSARY, REMOVE PARTS (9) THROUGH (14) FROM  EACH  BRACKET  (8). a. b. 3. IF Remove nut (9), lockwasher (10), and flatwasher (11). Remove rocker arm (12), spacer (13), and bolt (14). NECESSARY, REMOVE PARTS (15) UPPER CONTROL VALVE LINKAGE SHOWN - LOWER CONTROL VALVE LINKAGE SIMILAR. THE (22) FROM EACH ROLLER ARM (12). a. Remove cotter pin (15), flatwasher (16), and pin (17). 9-24