TM10-3930-660-20 9-5. TRANSMISSION  DISCONNECT  AND BRAKE PEDALS   - REPLACE/ADJUST (Cont’d) 8. INSTALL PADS (1) AND (2) ON PEDAL ARMS (3) AND (4). a. b. Position pad (1) on pedal arm (3) and secure with capscrew (5), new lockwasher (7), and nut (6). Position pad (2) on pedal arm (4) and secure with capscrew (8), new lockwasher (9), and nut (10). ADJUSMENT  OF PEDAL LINKAGE ADJUST CLEVIS TRANSMISSION  DISCONNECT (13) AND PUSHROD PIN (35) SECURING PEDAL ARM (3). a. b. c* d. e. Remove cotter pin (17) and clevis pin (15) securing clevis (13) to Pedal arm (3). Discard cotter pin (17) . Loosen jam nuts (36) and (37) on pushrod (35). Rotate pushrod pin (35) and\or clevis (13) in or out as required until clevis pin (15) fits freely through holes on clevis (13) and pedal  arm  (3). Secure clevis (13) to pedal arm (3) with clevis pin (15) and new cotter pin  (17). Tighten jam nuts (36) and (37). 9-12