TM10-3930-660-20 9-5. TRANSMISSION  DISCONNECT  AND BRAKE PEDALS -   REPLACE/ADJUST (Cont’d) 4. 5. 6. 7. POSITION SHAFT (19) THROUGH HOLE ON RIGHT-HAND SIDE OF BRACKET (23). INSTALL PEDAL ARMS (3) AND (4) ON SHAFT  (19). a. Slowly slide shaft (19) through bracket  (23) and position washer (26), and pedal arm (4) on shaft (19) . b. Continue sliding shaft (19) co through bracket (23) and position washer (25), pedal arm (3), and washer (24) on shaft (19). Position shaft (19) into hole on left-hand side of bracket (23) and secure with nut (20), new lockwasher (21), and bolt (22). INSTALL CLEVIS PINS (15) AND (16) TO SECURE PEDAL ARMS (3) AND (4) TO CLEVIS (13) AND (14). INSTALL NEW COTTER PINS (17) AND (18). INSTALL RETURN SPRINGS (11) AND (12) TO PEDAL ARMS (3) AND (4). 9-11