TM10-3930-660-20 9-5. TRANSMISSION  DISCONNECT  AND BRAKE PEDALS -  REPLACE/ADJUST (Cont‘d) 2. Be REMOVE RETURN SPRINGS (11) AND  (12 ) FROM PEDAL ARMS (3) AND (4). CAUTION careful that clevis (13), clevis (14), and attached pedal linkages do not drop when clevis pins (15) and (16) are removed. 3. To REMOVE AND DISCARD COTTER PINS (17) AND (18). REMOVE CLEVIS PINS (15) AND (16) SECURING CLEVIS (13) AND (14) TO PEDAL ARMS (3) AND (4). CAUTION prevent possible damage, do not allow pedal arms ‘(3) and (4) to drop when shaft (19) is removed. 4. REMOVE PEDAL ARMS (3) AND (4) FROM SHAFT  (19). a. Remove nut (20), lockwasher (21), and capscrew (22) securing shaft (19)  to  bracket  (23).  Discard lockwasher  (21). b. Slowly center washer washer slide shaft (19) toward of vehicle and remove (24), pedal arm (3) and (25) from shaft (19). c. Continue sliding shaft (19) toward center of vehicle, and remove pedal arm (4) and washer (26) from shaft  (19). 5. PULL SHAFT (19) THROUGH HOLE ON RIGHT-HAND SIDE OF BRACKET (23). 9-9