| |
TM10-3930-660-20
9-4.
TRANSMISSION CABLE ASSEMBLIES - REPLACE (Cont’d)
2. CONNECT TRANSMISSION CABLE ASSEMBLIES
(1) AND (2) TO TRANSMISSION (3).
a. Position cable assemblies (1) and
(2) on transmission (3) as tagged
and secure each cable assembly with
clamps (7) and nuts (6).
b. Position ends of cable assemblies
(1) and (2) on transmission (3) and
secure each cable assembly with
washer (5) and new cotter pin (4).
3. INSTALL TRANSMISSION SHIFTER. VERIFY
THAT SHIFTER POSITIONS CORRESPOND WITH
TRANSMISSION RANGES, AND ADJUST CABLE
ASSEMBLIES AT SHIFTER IF REQUIRED/
PARA. 9-3.
4. INSTALL LEFT-HAND INSTRUMENT PANEL,
PARA. 8-6.
5. INSTALL TRANSMISSION COVER,
PARA. 16-6.
9-7
|