TM10-3930-660-20 9-4. TRANSMISSION CABLE ASSEMBLIES - REPLACE This  task  covers: a. Removal b.  Installation Initial Setup Tools Tool Kit, Automotive Mechanics Materials/Parts Cotter Pin (4) Tags (App. C, Item 51) Equipment  Condition Vehicle parked on level ground. Left-hand instrument panel removed from front console, para. 8-6. Transmission shifter disconnected, para.  9-3. Transmission cover removed, para.  16-6. 1. DISCONNECT TRANSMISSION CABLE ASSEMBLIES (1) AND (2) FROM TRANSMISSION (3). a. b. Remove cotter pin (4) and washer (5) from end of each cable assembly (1)  and  (2)  at  transmission  (3). Discard cotter pin (4). Remove nuts (6) and clamps (7) securing each cable assembly (1) and (2) to transmission (3). Tag and remove cable assemblies (1) and (2)  . Note routing of cable assemblies (1) and (2) through vehicle cab and frame for use during installation. 2. REMOVE CABLE ASSEMBLIES (1) AND (2) FROM CAB AND FRAME OF VEHICLE. INSTALLATION 1. INSTALL CABLE ASSEMBLIES (1) AND (2) TO CAB AND FRAME OF VEHICLE AS NOTED DURING  REMOVAL. 9-6