| |
TM10-3930-660-20
8-51. HYDRAULIC BYPASS SWITCH - REPLACE/TEST (Cent’d)
a. Apply Loctite 59241 to threads of
switch (1) and install switch
(1) to coupling (5).
NOTE
During step lb., apply Loctite sealant
only to threads of adapter (4) that mate
with coupling (5).
Do not apply sealant
to threads that mate with tube assembly
(2).
b. If removed, apply Loctite 59241 to
threads of adapter (4) and install
adapter (4) to coupling (5).
c. If removed, install tube assembly
(2) to adapter (4),
NOTE
When tightening tube assembly (2) during
step id., be sure that terminals of
switch (1) are facing toward right side
of vehicle.
d. Install tube assembly (2) to tee
(3).
2. INSTALL ELECTRICAL LEADS TO SWITCH
(1) .
a. Install electrical lead 91 to
terminal NC of switch (l).
b. Install electrical lead 10 to
terminal C of switch (l).
TESTING
1. TEST FOR PROPER FuNCTIONING OF
HYDRAULIC BYPASS SWITCH (1).
a.
b.
Place emergency steer switch in the
ON position, TM10-39301-660-10.
Place steer select control in the
“2 wheel steer” position, TM10-
3930-660-10.
8-162
|
