TM10-3930-660-20 8-45. BATTERY BOX AND COVER—REPLACE (Cont’d) 2. 3. 4. IF ON a. b. REMOVED , INSTALL STE/ICE SHUNT (1) BATTERY BOX (2) l Position STE/ICE shunt (1) on battery box (2) . Secure STE/ICE shunt (1) to battery box (2) with two nuts (29) , two  flatwashers  (28) and  two capscrews (27) . POSITION BATTERY BOX (2) ON MOUNTING STUDS (26) AT BACK OF CAB. SECURE BATTERY BOX (2) TO MOUNTING STUDS (26) WITH FOUR WASHERS (25) AND FOUR NEW LOCKNUTS (24 ) . Insert electrical leads and cables through hole at base of battery box prior to performing step 5. 5. INSTALL NEGATIVE BATTERY CABLE (5), POSITIVE EMERGENCY STEER PUMP POWER CABLE (18), AND POSITIVE BATTERY CABLE (17) AS TAGGED TO SLAVE RECEPTACLE (19). a. b. co Position negative battery cable (5) on negative terminal (f) of slave receptacle (19). Secure cable (5) to terminal (f) with capscrew (22) and new starwasher  (23). Position positive emergency steer pump power cable (18) and positive battery cable (17) on positive terminal (e) of slave receptacle (19) . 8-129