TM10-3930-660-20 8-45. BATTERY BOX AND COVER -   REPLACE  (Cont’d) c. Remove two capscrews (40), two locknuts (41) and two retaining straps (42) from two brackets (39). 8. IF NECESSARY, REMOVE CONDUIT (44) FROM BATTERY BOX INSTALLATION 1. 2. IF  REMOVED, BATTERY BOX IF  REMOVED, THROUGH 42) BATTERY BOX a. b. c. (2)  . INSTALL CONDUIT (44) TO (2)  l INSTALL HARDWARE (PARTS 34 TO BATTERY BOX (2) AND COVER (43). Secure two retaining straps (42) to two brackets (39) with two capscrews (40) and two new locknuts (41). Secure two brackets (39) to battery box cover (43) with two bolts (37) and two new locknuts (38). Secure two catch clamps (35) to battery box (2) with four screws (34)  and  four  locknuts  (36). When positioning slave receptacle (19) on battery box (2), be sure negative terminal (f) is facing toward center of vehicle. 1. IF REMOVED, INSTALL SLAVE RECEPTACLE (19) ON BATTERY BOX (2). a. b. Position slave receptacle (19) on battery  box  (2). Secure slave receptacle (19) and cap (33) to battery box (2) with four screws (32), eight new lockwashers (31) and four nuts (30). 8-128