TM10-3930-660-20 8-45. BATTERY BOX AND COVER -   REPLACE  (Cont’d) .- Remove all electrical leads and cables through hole at base of battery box pr 3. 4. 5. 6. 7. ior to performing step 3. ^- REMOVE FOUR LOCKNUTS (24) AND WASHERS (25) SECURING BATTERY BOX (2) TO FOUR MOUNTING STUDS (26) ON BACK OF CAB. DISCARD LOCKNUTS (24). REMOVE BATTERY BOX (2) FROM MOUNTING STUDS  (26). IF NECESSARY, REMOVE STE/ICE SHUNT (1) FROM BATTERY BOX (2). a. b. IF Remove two bolts (27), two flatwashers (28) and two nuts (29) securing STE/ICE shunt (1) to battery box (2). Remove STE/ICE shunt (1) from battery box (2). NECESSARY, REMOVE SLAVE RECEPTACLE (19)  FROM  BATTERY  BOX  (2). a. b. IF 34 Remove four nuts (30), eight lockwashers (31), and four screws (32)  securing  slave  receptacle  (19) and cap (33) to battery box (2). Discard lockwashers (31). Remove slave receptacle (19) and cap (33) from battery box (2). NECESSARY, REMOVE HARDWARE (PARTS THROUGH 42) FROM BATTERY BOX (2) AND BATTERY BOX COVER (43). a. b. Remove four screws (34), two catch clamps (35) and four locknuts (36) from battery box (2). Discard locknuts  (36). Remove two bolts (37), two locknuts (38) and two brackets (39) from battery box cover (43). Discard locknuts  (38). 8-127